New Generation Benefits

  • Great Prices
  • Bonded and Insured
  • On-Time Service - On Your Schedule
  • 5-Year Transferable Warranty
  • Patented Refinishing Method
  • A+ BBB Accredited Business
  • We Accept Major Credit Cards
  • Free Estimates - Call Today!
  • 281-904-6370




THE NEW GENERATION REFINISHING PROCESS

We use a four-step process in bathtub resurfacing - Protect, Prep, Paint, & Pick-Up. Your bathtub, countertop, or other refinished surface will be cured and ready-to-use in only 24 hours!

Step 1 - Protect

Our specialist will first protect your bathroom by clearing any items in the bathroom as well as covering areas with plastic sheets that are not being refinished. Our painting method has very low fumes and over-spray, but we take extra precaution at every opportunity.

Step 2 - Prep

We will then begin prep work on the bathtub. In combination with the coating products used, this is where a long-lasting and durable finish is made or lost. If the surface is not correctly prepared, the chemical bonding that needs to take place will not occur. This is why many surface restoration companies fail, because they do not take the time to correctly prepare the surface. Preparation work consists of sanding the old finish as well as filling any cracks and chips. Depending on the type of finish, an acid-etching product may be used to clean and prepare the surface for the new coating to bond with.

Step 3 - Paint

New Generation uses the Glas-Tech 9000 method to provide beautiful and durable surface. The product is described more below. Once the surface is properly prepped, two coats of primer are applied. After this cures, three coats of the Glas-Tech acrylic-urethane hybrid compound is applied to provide a deep-shine and enduring surface.

step 4 - Pick-up

That's it! In only 24 hours, your surface will be ready to use again. Our crews will clean up all work areas, remove plastic protective sheets and restore removed items to your bathroom. We will also review all the do's and do not's that will help you keep you newly refinished surfacing looking beautiful for many years!


BATHTUB REFINISHING

Glas-Tech 9000 Coating Method

Our exclusive process utilizes Glas-Tech 9000 coating surfaces, which is an acrylic-urethane compound. This hybrid compound provides the durability of urethane with the cosmetic benefits of acrylic. The coating is high-gloss, cures in 24 hours, and is available in over 1,000 colors. The most important feature of Glas-Tech resurface coatings is its durability and long-term lifespan, possible because of something called “cross-linking density”, which is the number of chemical bonds holding the molecules together. On a molecular level, the cross-linking that takes place as the product hardens is much denser than other resurfacing coating methods. The denser the cross-linking, the tougher the film will become as it cures. This means your new surface will stay looking new for a long time, as well as resist cracks and chips.

When laboratory tested, Glas-Tech is even more resistant to chemical impact than a typical modified urethane refinishing coating. As the formula is curing, its pigment settles to the bottom of the film, and a clear resin-rich layer forms on top. The top layer offers long-term protection from extreme moisture and harsh impacts and stands up to stains, solvents and acids. You will appreciate not only the coating’s factory-new finish, but Glas-Tech is more than just show. The clear resin layer that naturally forms on the surface as it cures also provides the impact-, stain-, and acid-resistance that sets it apart from the competition.


COUNTERTOP RESURFACING

Stone Fleck Coloring Method

With Stone-Fleck you will enjoy a savings of up to 80% over replacement with minimal downtime involved. Get a NEW countertop in just a few hours!

As it is applied, Stone-Fleck forms a tough, durable finish that provides superior protection for many more years against impacts and abrasions that can shorten the life span of traditional laminate surfaces. The combination of quality and low-cost makes Stone-Fleck the best value for your remodeling dollar.

Another Advantage of Stone-Fleck non-porous finish is that it is highly resistant to acids and stains. Plus, you will never have to recondition or seal with Stone-Fleck, unlike real stone surfaces. Stone-Fleck retains its natural luster and is simply cleaned with soap and water, or mild cleaners.